Skip to main content
Toll Free: (888) 205-3731
Model H22
  • 35″ wide //
  • 41″ tall //
  • 33″ deep
Hooked to your existing pump, the H22 is all of the functionality you need for sprayer filling in a compact and cost-effective platform.

By connecting the output of your transfer pump to the H22, you have a single station that performs all your liquid and dry handling needs: water transfer, container emptying and rinsing, bulk chemical induction direct to your sprayer, recirculation and agitation for dry flowables and solubles. The field-tested valve arrangement allows you to use it whichever way suits your application: a venturi-based system that keeps the water pump free of chemical at all times, or a closed-loop recirculation system for aggressive agitation and even faster chemical handling.

Features & Benefits
  • Full 10L/20L container emptying and rinsing capabilities
  • Comes with the original Handler Knife
  • Closed-loop recirculation
  • Venturi with Handler and bulk draw capabilities
Quick Specifications
  • 42 US gallons/160 L
  • 2” Camlock connections
  • 16” Hinged & lockable lid
  • 2” Dual-inlet venturi
Model H22P55
  • 50″ wide //
  • 41″ tall //
  • 35″ deep
The H22P55 is identical to the H22 but includes a 2″ Banjo pump and Honda GX160 engine.

The integrated transfer pump performs sprayer filling along with all of your liquid and dry handling needs: closed-loop recirculation and agitation, bulk chemical induction, 10L/20L container emptying and rinsing, direct chemical induction to sprayer. The field-tested valve arrangement allows you to use it whichever way suits your application: a venturi-based system that keeps the water pump free of chemical at all times, or a closed-loop recirculation system for aggressive agitation and even faster chemical handling.

The H22P55 comes standard with Handler’s proprietary dual-inlet venturi. This allows the venturi to draw from the Handler tank or from a bulk chemical container without any extra plumbing or hoses.

Features & Benefits
  • Full 10L/20L container emptying & rinsing capabilities
  • Comes with the original Handler Knife
  • Closed-loop recirculation
  • Venturi with Handler and bulk draw capabilities
  • Tank can be emptied via venturi or via direct pump draw
Quick Specifications
  • 42 US gallons/160 L
  • 2” Camlock connections
  • 16” Hinged & lockable lid
  • 2” Dual-inlet venturi
  • 2” Banjo pump/Honda GX160 engine
Model H23
  • 35″ wide //
  • 41″ tall //
  • 40″ deep
The H23 is the most compact model that still offers all the flow and functionality of the larger models.

Suitable for everything from dry flowables to 10L and 20L containers to bulk containers, this is the most compact 3” inductor system on the market. Water is simply pumped to the inlet of the H23, which provides the flow to agitate and fill the tank, empty and rinse containers, power the dual-inlet venturi, rinse the tank, and of course transfer water to your sprayer tank.

The Handler™’s exclusive dual-inlet venturi comes plumbed to draw from your choice of The Handler™ tank or your bulk containers directly into your sprayer fill line. The full 3” bypass line on the H23 is designed to manage the rigors of any pump with capacities of up to 280 GPM (1060 LPM) without any concern for pressure. Banjo’s exclusive sweep elbows are used to eliminate as much line turbulence as possible.

Features & Benefits
  • Full 10L/20L container emptying & rinsing capabilities
  • Comes with the original Handler Knife
  • Dual-inlet venturi with The Handler™ and bulk draw capabilities
  • Durable 3” bypass for flows up to 280 GPM
Quick Specifications
  • 42 US gallons/160 L
  • 3” Camlock connections
  • 16” Hinged & lockable lid
  • 2” Dual-inlet venturi
Model H23P65
  • 56″ wide //
  • 41″ tall //
  • 40″ deep
The H23P65 is the industry’s smallest complete inductor system to utilize a full 3″ plumbing system.

Utilizing sweep elbows to reduce corner turbulence, the H23P65 bypasses water to your sprayer with almost no drop in pump output.

The Banjo 3″ transfer pump (the proven 300PO) is powered by a Honda GX200 engine. Honda has tested this Handler configuration and as a result your Handler’s Honda engine is covered by Honda Warranty at any authorized service centre in the world.

For periodic users of dry flowables, solubles, or AMS The Handler™ H23P65 is an ideal choice.

Features & Benefits
  • Full 10L/20L container emptying & rinsing capabilities
  • Comes with the original Handler Knife
  • Dual-inlet venturi with The Handler™ and bulk draw capabilities
  • High volume 3” bypass to maximize pump flow and reduce tank fill time
  • Closed-loop recirculation and agitation
Quick Specifications
  • 42 US gallons/160 L
  • 3” Camlock connections
  • 16” Hinged & lockable lid
  • 2” Dual-inlet venturi
  • 3” Banjo pump/Honda GX200 engine
Special Features
The Knife
The Handler™’s original Knife system cuts plastic chemical containers, empties their contents for mixing, and fully rinses the container for safe disposal. This all done in less than 30 seconds while filling your sprayer. There is no waste or residual chemical left in the container once rinsed.
The Venturi
The venturi is a specially-designed fitting that draws chemicals from The Handler™ into the sprayer tank while bypassing the pump. The venturi prevents contamination when changing products, mixes chemical before they enter the sprayer tank, and provides continuous flush, saving time and eliminating contamination.
Testimonials

We have around 1800 acres of a corn and bean operation. We spray everything 3 times—pre, post, and fungicide. Prior to purchasing The Handler™, we were using two big induction cones. We usually mix around 3–5 different products in a batch, and with two inductors it was definitely not efficient by any means. Trying to rinse out jugs and the inductor cones between batches was nearly impossible to do on the truck—not only did it take too much time, it was also challenging trying not to get any product on you.

We wanted to both eliminate the clutter on the back of the nurse truck caused by the hoses with having two inductors, while also making it faster, easier and safer. We also wanted to only have one guy mixing up batches instead of two.

Switching to The Handler II made mixing go so much smoother. The Handler™ makes rinsing a breeze and so much safer for our workers. All in all, The Handler™ cut down our mixing time significantly, by allowing us to mix products more efficiently. It also gives us more time to think about what you’re doing so you don’t mess up a load. But the best part is there no more reaching around for hoses or valves—everything is right in front of you and nearby! Thank you for making such a great product.

Svoboda Farms

Nebraska
Other Models
  • Model H12

    The H12 model is the most compact Handler and is designed for direct induction of chemical into sprayers
  • Model H22

    The H22 model is all of the functionality you need for sprayer filling in a compact and cost-effective platform.
  • Model H22P55

    The H22P55 model is identical to the H22 model but includes a 2″ Banjo pump and Honda GX160 engine.
  • Model H23

    The H23 model is the most compact model that still offers all the flow and functionality of the larger models.
  • Model H23P65

    The H23P65 model is the industry’s smallest complete inductor system to utilize a full 3″ plumbing system.
  • Model H32

    The H32 is one of the best-selling models. A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders.
  • Model H32P55

    After 25 years, the H32P55 model remains one of the best-selling models in the entire Handler lineup.
  • Model H33

    The H33 model is the super-sized version of the popular H23 model with 70 US gallon/275L capacity.
  • Model H33P65

    The highly versatile, 70 US gallon/275L H33P65 model has been the most popular on-farm model for many years.
  • Model H33HD

    The H33HD model has been designed to work with new 3” pumps being made with flows in excess of 280 GPM (1060 LPM).
  • Model H33HDP13

    The H33HDP13 model utilizes a Hypro 3” pump and proven Honda GX390 engine complete with an electric start.
  • Model H43P65

    The H43P65/H43P65V models marry max liquid volume with incredible agitation capability.
  • Model H43P13V

    Taking advantage of the new high-volume pumps available today, the H43P13V model reduces sprayer fill time.

    Get in Touch

    To learn more about our products, contact a dealer near you. If you need help finding one, send us a message below or email us at info@thehandler.com.

    Become a Dealer

    Join our worldwide team of dealers. We provide our export partners with exceptional support, including:

    • A quality product with 30,000+ units sold
    • Brand and development support
    • Onsite and electronic training
    • Phone contact in dealer’s local time zone
    • Worldwide shipping capabilities
    • Complete export documentation services
    • Marketing and trade show support

    To find out how to become a dealer, send us a message or email us at dealerinquiries@thehandler.com.

    Helping you measure, mix, and safely load chemicals into sprayers quickly and efficiently.

    The Handler™ is a proprietary line of chemical management systems that enables quick, easy, and safe mixing and loading of agricultural chemicals into sprayers, airplanes, and hauling tank systems.
    • Manufacturing

    12015-152 Street NW
    Edmonton, AB T5V 1G4

    • Customer Support

    (952) 446-8902
    Toll Free: (888) 205-3731

    • General Inquiries
    • Dealer Inquiries

    © The Handler. All Rights Reserved.