Skip to main content
Toll Free: (888) 205-3731
Model H43P65 & H43P65V
  • 47″ wide //
  • 50″ tall //
  • 76″ deep
The Handler IV is the king of batch induction systems with its larger liquid volume and incredible agitation capability.

The H43P65V comes complete with a total drainage tank, Banjo 3” pump, a dual inlet venturi for bulk chemical induction, twin agitation lines, two 16” hinged lids (one with the Handler Knife and one without), container and tank rinsing nozzles, a 4-way forkliftable steel frame, and a pump containment tray. Using closed loop recirculation through the exclusive dual inlet venturi, this model is able to induct bulk chemical into The Handler™ tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowables needing to be agitated, a Handler IV can do it all before your sprayer is back to be filled.

Dry AMS (ammonium sulfate) users may be interested in even more agitation. The similar model H43P65 replaces the venturi with a second 2” full port agitation line and provides agitation strong enough to dissolve even AMS that is not spray-grade.

Features & Benefits
  • Twin agitation lines
  • Comes with the original Handler Knife
  • Closed-loop recirculation and agitation
  • Full 10L/20L container emptying and rinsing capabilities
  • Dual-inlet venturi for driving bulk chemical into The Handler™ or direct to sprayer fill line
Quick Specifications
  • 230 US gallons/870 L
  • 3” Camlock connections
  • Two 16” hinged & lockable lids
  • 2” Dual-inlet venturi
  • Rotacraft tank rinsing nozzle
  • 3″ Banjo/Honda GX200 engine
Model H43P13V
  • 47″ wide //
  • 50″ tall //
  • 76″ deep
Taking advantage of the new high-volume pumps available today, the H43P13V reduces sprayer fill time yet again.

With bypass rates of 350 GPM made possible by the 3” Hypro polypropylene pump, this is the fastest Handler IV yet. In addition to the increased bypass speed, the pump provides higher pressures and creates even greater agitation than the H43P65V. Using closed loop recirculation through the exclusive dual inlet venturi, this model is able to induct bulk chemical into The Handler™ tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowables needing to be agitated, a Handler IV can do it all before your sprayer is back to be filled.

The Honda GX390 engine comes standard with an electric start. Instructions on proper cabling are included for connection to your own battery or 12V power source. Even if your power is down, Honda’s trademark easy-starting engines with built-in decompression can be started with the manual recoil.

Features & Benefits
  • Twin agitation lines
  • Comes with the original Handler Knife
  • Closed-loop recirculation and agitation
  • Full 10L/20L container emptying and rinsing capabilities
  • Dual-inlet venturi for driving bulk chemical into The Handler™ or direct to sprayer fill line
  • 350 GPM (1325 LPM) bypass rates
Quick Specifications
  • 230 US gallons/870 L
  • 3” Camlock connections
  • Two 16” hinged & lockable lids
  • 2” Dual-inlet venturi
  • Rotacraft tank rinsing nozzle
  • 3″ Hyprod/Honda GX390 engine
Special Features
The Knife
The Handler™’s original Knife system cuts plastic chemical containers, empties their contents for mixing, and fully rinses the container for safe disposal. This all done in less than 30 seconds while filling your sprayer. There is no waste or residual chemical left in the container once rinsed.
The Venturi
The venturi is a specially-designed fitting that draws chemicals from The Handler™ into the sprayer tank while bypassing the pump. The venturi prevents contamination when changing products, mixes chemical before they enter the sprayer tank, and provides continuous flush, saving time and eliminating contamination.
Testimonials

We cultivate approximately 100 hectares of strawberry plants, lavender plants, and raspberries near Ulvenhout in southern Netherlands. We have used The Handler™ since 2013 because we take great care in preparing mixes before they are loaded into the sprayer. Our dry plant protection products are measured by the bag and by the kilogram. The Handler™ lets us be very precise. Everything is possible for mixing – fertilizers and plant protection products in both liquids and powders.

Jac-jan van den Wijngaart

Ulvenhout, Netherlands
Other Models
  • Model H12

    The H12 model is the most compact Handler and is designed for direct induction of chemical into sprayers
  • Model H22

    The H22 model is all of the functionality you need for sprayer filling in a compact and cost-effective platform.
  • Model H22P55

    The H22P55 model is identical to the H22 model but includes a 2″ Banjo pump and Honda GX160 engine.
  • Model H23

    The H23 model is the most compact model that still offers all the flow and functionality of the larger models.
  • Model H23P65

    The H23P65 model is the industry’s smallest complete inductor system to utilize a full 3″ plumbing system.
  • Model H32

    The H32 is one of the best-selling models. A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders.
  • Model H32P55

    After 25 years, the H32P55 model remains one of the best-selling models in the entire Handler lineup.
  • Model H33

    The H33 model is the super-sized version of the popular H23 model with 70 US gallon/275L capacity.
  • Model H33P65

    The highly versatile, 70 US gallon/275L H33P65 model has been the most popular on-farm model for many years.
  • Model H33HD

    The H33HD model has been designed to work with new 3” pumps being made with flows in excess of 280 GPM (1060 LPM).
  • Model H33HDP13

    The H33HDP13 model utilizes a Hypro 3” pump and proven Honda GX390 engine complete with an electric start.
  • Model H43P65

    The H43P65/H43P65V models marry max liquid volume with incredible agitation capability.
  • Model H43P13V

    Taking advantage of the new high-volume pumps available today, the H43P13V model reduces sprayer fill time.

    Get in Touch

    To learn more about our products, contact a dealer near you. If you need help finding one, send us a message below or email us at info@thehandler.com.

    Become a Dealer

    Join our worldwide team of dealers. We provide our export partners with exceptional support, including:

    • A quality product with 30,000+ units sold
    • Brand and development support
    • Onsite and electronic training
    • Phone contact in dealer’s local time zone
    • Worldwide shipping capabilities
    • Complete export documentation services
    • Marketing and trade show support

    To find out how to become a dealer, send us a message or email us at dealerinquiries@thehandler.com.

    Helping you measure, mix, and safely load chemicals into sprayers quickly and efficiently.

    The Handler™ is a proprietary line of chemical management systems that enables quick, easy, and safe mixing and loading of agricultural chemicals into sprayers, airplanes, and hauling tank systems.
    • Manufacturing

    12015-152 Street NW
    Edmonton, AB T5V 1G4

    • Customer Support

    (952) 446-8902
    Toll Free: (888) 205-3731

    • General Inquiries
    • Dealer Inquiries

    © The Handler. All Rights Reserved.