Handler III

A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders. Full functionality includes: Handler tank filling and agitation, closed-loop recirculation, dual-inlet venturi draw from your choice of The Handler™ tank or bulk containers, 10L & 20L container emptying and rinsing, tank rinsing, a wash line, and of course water transfer to the sprayer tank.

A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders which can be easily mixed into solution with the integrated pump and closed loop recirculation. Full functionality includes: The Handler™ tank filling and agitation, closed loop recirculation, dual inlet venturi draw from your choice of Handler tank or bulk containers, 10L & 20L container emptying and rinsing, tank rinsing, a wash line, and of course water transfer to the sprayer tank.

All the functionality with a larger tank, combined with cost effective 2” plumbing and pump, make the H32P55 a steady favorite on the farm.

With its larger tank it is perfect for handling everything from dry flowables, to 10L and 20L containers, to bulk containers. Water is simply pumped to the inlet of the H33 which provides the flow to agitate and fill the tank, empty and rinse containers, power the dual inlet venturi, rinse the tank, and of course transfer water to your sprayer tank. The Handler™ exclusive dual inlet venturi comes plumbed to draw from your choice of The Handler™ tank or your bulk containers, directly into your sprayer fill line.

The full 3” bypass line on the H33 is designed to handle the rigors of any pump with capacities of up to 280 GPM (1060 LPM) without concern for pressure. Banjo’s sweep elbows are used to eliminate as much line turbulence as possible. To ensure this larger tank size can be thoroughly cleaned, all H3 models incorporate the Rotacraft tank cleaning nozzle.

The large 70 US gallon tank combined with the steep cone tank, agitation nozzle, and dual inlet venturi make this the most versatile of all Handlers. With capacity to agitate larger volumes of dry products the H33P65 is commonly found in areas where high volumes of AMS are used. Due to the larger tank size, a Rotacraft tank rinsing nozzle has been added to Handler III models to ensure proper cleanout when switching chemicals.

Designed specifically to work with a Banjo 3″ polypropylene pump powered by a Honda GX200 engine, water bypass rates are accomplished with almost no reduction in flow your sprayer.

At these flow rates, water in 3” plumbing moves in a fully turbulent motion and creates significant line pressures and risk of water hammer. Engine power requirements increase with these pumps and so does the need to match your chemical inductor properly.

With a re-designed bypass line free of directional changes, the H33HD takes full advantage of your pump’s flow potential. As a safety precaution against the higher operating pressures, the H33HD is also equipped with a pressure spike relief valve to prevent water hammer damage. Maximize the performance of your high volume 3” pump without sacrificing safety by using the purpose built H33HD. Your Handler dealer will be glad to help determine when the H33HD is the right Handler for you.

Sprayer fill time is minimized with Handler bypass flow rates of 350 GPM (1325 LPM) thanks to the Hypro pump and our HD purpose built plumbing. 3” flow rates this high create higher operating pressures and the H33HDP13 is designed to handle them. The pressure spike relief valve eliminates any risk of water hammer which ensures operator safety along with protecting your equipment.

Even though the plumbing arrangement is different from other H2 and H3 Handlers, the H33HDP13 maintains all of the functionality you’ve come to expect in The Handler™, including sprayer filling container emptying and rinsing, venturi based bulk chemical induction, tank emptying with venturi or direct pump draw, closed loop circulation and agitation, and wash line.

Over this off-season for my lawn care business, I needed to really improve my efficiency when it came to my fertilizer and chemical mixing process. I decided to purchase the Handler 3. I used to use a fire hydrant to fill my nurse tank while I added fertilizer and chemicals. The process took at least 45 minutes at best. With my Handler 3, I added a 1500 gallon fresh water tank. Using that and my Handler, I was able to cut my time down to only five minutes!!! It took longer to measure the products than it did to fill The Handler™ with my products, recirculate, and pump out to my nurse tank. This machine will easily allow more production time for my business. Only wish I bought one sooner!

Thomas Strong