MODEL H32

The H32 is one of the best-selling models in the entire Handler lineup.

A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders. Full functionality includes: Handler tank filling and agitation, closed-loop recirculation, dual-inlet venturi draw from your choice of Handler tank or bulk containers, 10L & 20L container emptying and rinsing, tank rinsing, a wash line, and of course water transfer to the sprayer tank.

Features and Benefits

Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi and bulk draw capabilities
Comes with the original Handler Knife
Closed loop recirculation and agitation

Quick Specifications

70 US gallons/275L
2” Camlock connections
16” Hinged & lockable lid
2” Dual-inlet venturi
MODEL H32P55

After 25 years, the H32P55 remains one of the best-selling models in the entire Handler lineup.

A larger 70 US gallon tank allows for handling higher volumes of dry flowables and powders which can be easily mixed into solution with the integrated pump and closed loop recirculation. Full functionality includes: Handler tank filling and agitation, closed loop recirculation, dual inlet venturi draw from your choice of Handler tank or bulk containers, 10L & 20L container emptying and rinsing, tank rinsing, a wash line, and of course water transfer to the sprayer tank.

All the functionality with a larger tank, combined with cost effective 2” plumbing and pump, make the H32P55 a steady favorite on the farm.

Features and Benefits

Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi and bulk draw capabilities
Integrated transfer pump
Comes with the original Handler Knife
Closed loop recirculation and agitation
Tank emptying by venturi or direct pump draw

Quick Specifications

70 US gallons/275L
2” Camlock connections
16” Hinged & lockable lid
2” Dual-inlet venturi
2” Banjo pump/Honda GX200 engine
Rotacraft tank rinsing nozzle​
MODEL H33

The H33 is the super-sized version of the popular H23.

With its larger tank it is perfect for handling everything from dry flowables, to 10L and 20L containers, to bulk containers. Water is simply pumped to the inlet of the H33 which provides the flow to agitate and fill the tank, empty and rinse containers, power the dual inlet venturi, rinse the tank, and of course transfer water to your sprayer tank. The Handler exclusive dual inlet venturi comes plumbed to draw from your choice of the Handler tank or your bulk containers, directly into your sprayer fill line.

The full 3” bypass line on the H33 is designed to handle the rigors of any pump with capacities of up to 280 GPM (1060 LPM) without concern for pressure. Banjo’s sweep elbows are used to eliminate as much line turbulence as possible. To ensure this larger tank size can be thoroughly cleaned, all H3 models incorporate the Rotacraft tank cleaning nozzle.

Features and Benefits

Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi and bulk draw capabilities
Durable 3” bypass for flows up to 280 GPM (1060 LPM)
Comes with the original Handler Knife

Quick Specifications

70 US gallons/275L
3” Camlock connections
16” Hinged & lockable lid
2” Dual-inlet venturi
Rotacraft tank rinsing nozzle
MODEL H33P65

The H33P65 has been the most popular on-farm model for many years.

The large 70 US gallon tank combined with the steep cone tank, agitation nozzle, and dual inlet venturi make this the most versatile of all Handlers. With capacity to agitate larger volumes of dry products the H33P65 is commonly found in areas where high volumes of AMS are used. Due to the larger tank size, a Rotacraft tank rinsing nozzle has been added to Handler III models to ensure proper cleanout when switching chemicals.

Designed specifically to work with a Banjo 3″ polypropylene pump powered by a Honda GX200 engine, water bypass rates are accomplished with almost no reduction in flow your sprayer.

Features and Benefits

Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi and bulk draw capabilities
Integrated transfer pump
Comes with the original Handler Knife
Closed-loop recirculation and agitation
Tank emptying by venturi or direct pump draw

Quick Specifications

70 US gallons/275L
3” camlock connections
16” Hinged & lockable lid
2” Dual-inlet venturi
3” Banjo pump/GX200 Honda engine
Rotacraft tank rinsing nozzle
MODEL H33HD

The H33HD has been designed specifically to work with new 3” pumps being made with flows in excess of 280 GPM (1060 LPM).

At these flow rates, water in 3” plumbing moves in a fully turbulent motion and creates significant line pressures and risk of water hammer. Engine power requirements increase with these pumps and so does the need to match your chemical inductor properly.

With a re-designed bypass line free of directional changes, the H33HD takes full advantage of your pump’s flow potential. As a safety precaution against the higher operating pressures, the H33HD is also equipped with a pressure spike relief valve to prevent water hammer damage. Maximize the performance of your high volume 3” pump without sacrificing safety by using the purpose built H33HD. Your Handler dealer will be glad to help determine when the H33HD is the right Handler for you.

Features and Benefits

Uni-directional bypass line for maximum flow
Pressure spike relief valve to prevent damage
Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi and bulk draw capabilities​
Comes with the original Handler Knife

Quick Specifications

70 US gallons/275L
3” camlock connections
16” Hinged & lockable lid
2” Dual-inlet venturi
Rotacraft tank rinsing nozzle
MODEL H33HDP13

The H33HDP13 utilizes Hypro’s 3” polypropylene pump and the proven Honda GX390 (13HP) engine complete with electric start.

Sprayer fill time is minimized with Handler bypass flow rates of 350 GPM (1325 LPM) thanks to the Hypro pump and our HD purpose built plumbing. 3” flow rates this high create higher operating pressures and the H33HDP13 is designed to handle them. The pressure spike relief valve eliminates any risk of water hammer which ensures operator safety along with protecting your equipment.

Even though the plumbing arrangement is different from other H2 and H3 Handlers, the H33HDP13 maintains all of the functionality you’ve come to expect in a Handler, including sprayer filling container emptying and rinsing, venturi based bulk chemical induction, tank emptying with venturi or direct pump draw, closed loop circulation and agitation, and wash line.

Features and Benefits

Uni-directional bypass line for maximum flow
Pressure spike relief valve to prevent damage
Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi and bulk draw capabilities​
Comes with the original Handler Knife
350 GPM (1325 LPM) bypass rates

Quick Specifications

70 US gallons/275L
3” camlock connections
16” Hinged & lockable lid
2” Dual-inlet venturi
Rotacraft tank rinsing nozzle
3” Hypro pump/GX390 Honda engine
Electric start (12V power not included)
Special Features
The Knife Cutaway

The Knife

The Handler’s original Knife system cuts plastic chemical containers, empties their contents for mixing, and fully rinses the container for safe disposal. This all done in less than 30 seconds while filling your sprayer. There is no waste or residual chemical left in the container once rinsed.

VENTURI_070620

The Venturi

The venturi is a specially-designed fitting that draws chemicals from the Handler into the sprayer tank while bypassing the pump. The venturi prevents contamination when changing products, mixes chemical before they enter the sprayer tank, and provides continuous flush, saving time and eliminating contamination.

Testimonials
We cultivate approximately 100 hectares of strawberry plants, lavender plants, and raspberries near Ulvenhout in southern Netherlands. We have used The Handler since 2013 because we take great care in preparing mixes before they are loaded into the sprayer. Our dry plant protection products are measured by the bag and by the kilogram. The Handler lets us be very precise. Everything is possible for mixing – fertilizers and plant protection products in both liquids and powders.
Jac-jan van den Wijngaart
Ulvenhout, Netherlands
Other Models
DISTRIBUTION

Find a Dealer

To learn more about our products, contact a dealer near you. If you need help finding one, send us a message below or email us at info@thehandler.com


    Become a Dealer

    Join our worldwide team of dealers. We provide our export partners with exceptional support, including:
    A quality product with 30,000+ units sold
    Brand and development support
    Onsite and electronic training
    Phone contact in dealer’s local time zone
    Worldwide shipping capabilities
    Complete export documentation services
    Marketing and trade show support
    To find out how to become a dealer, send us a message below or email us at dealerinquiries@thehandler.com