The Handler IV is the king of batch induction systems with its larger liquid volume and incredible agitation capability.
The H43P65V comes complete with a total drainage tank, Banjo 3” pump, a dual inlet venturi for bulk chemical induction, twin agitation lines, two 16” hinged lids (one with the Handler Knife and one without), container and tank rinsing nozzles, a 4-way forkliftable steel frame, and a pump containment tray. Using closed loop recirculation through the exclusive dual inlet venturi, this model is able to induct bulk chemical into the Handler tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowables needing to be agitated, a Handler IV can do it all before your sprayer is back to be filled.
Dry AMS (ammonium sulfate) users may be interested in even more agitation. The similar model H43P65 replaces the venturi with a second 2” full port agitation line and provides agitation strong enough to dissolve even AMS that is not spray-grade.
Features and Benefits
Twin agitation lines
Comes with the original Handler Knife
Closed-loop recirculation and agitation
Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi for driving bulk chemical into the Handler or direct to sprayer fill line
Quick Specifications
230 US gallons/870 L
3” Camlock connections
Two 16” hinged & lockable lids
2” Dual-inlet venturi
Rotacraft tank rinsing nozzle
3" Banjo/Honda GX200 engine
Taking advantage of the new high-volume pumps available today, the H43P13V reduces sprayer fill time yet again.
With bypass rates of 350 GPM made possible by the 3” Hypro polypropylene pump, this is the fastest Handler IV yet. In addition to the increased bypass speed, the pump provides higher pressures and creates even greater agitation than the H43P65V. Using closed loop recirculation through the exclusive dual inlet venturi, this model is able to induct bulk chemical into the Handler tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowables needing to be agitated, a Handler IV can do it all before your sprayer is back to be filled.
The Honda GX390 engine comes standard with an electric start. Instructions on proper cabling are included for connection to your own battery or 12V power source. Even if your power is down, Honda’s trademark easy-starting engines with built-in decompression can be started with the manual recoil.
Features and Benefits
Twin agitation lines
Comes with the original Handler Knife
Closed-loop recirculation and agitation
Full 10L/20L container emptying and rinsing capabilities
Dual-inlet venturi for driving bulk chemical into the Handler or direct to sprayer fill line
350 GPM (1325 LPM) bypass rates
Quick Specifications
230 US gallons/870 L
3” Camlock connections
Two 16” hinged & lockable lids
2” Dual-inlet venturi
Rotacraft tank rinsing nozzle
3" Hyprod/Honda GX390 engine

The Knife
The Handler’s original Knife system cuts plastic chemical containers, empties their contents for mixing, and fully rinses the container for safe disposal. This all done in less than 30 seconds while filling your sprayer. There is no waste or residual chemical left in the container once rinsed.

The Venturi
The venturi is a specially-designed fitting that draws chemicals from the Handler into the sprayer tank while bypassing the pump. The venturi prevents contamination when changing products, mixes chemical before they enter the sprayer tank, and provides continuous flush, saving time and eliminating contamination.

Model H12

Model H22

Model H22P55

Model H23

Model H23P65

Model H32

Model H32P55

Model H33

Model H33P65

Model H33HD

Model H33HDP13
Find a Dealer
To learn more about our products, contact a dealer near you. If you need help finding one, send us a message below or email us at info@thehandler.com